产品特点
·按浮动凹模压制系统和脱模位置恒定原理,不管零件的高度、脱模均在同一位置。
·使用凹模控制系统实现凹模定位运动,可靠的平面凹模止挡设计,确保了成型尺寸的精度控制,使密度均匀,产品坚固可靠。
·连杆驱动系统中的上滑块压制运动,使压机有优越的粉末压制特性。
·压机的设计与结构,简单直接,使得压机运行可靠,并减少了在压制复杂零件时的机器故障。
·压机的驱动及主要运动构件安装于压面的下部,使压机重心低,运行稳定。
FEATURES
·Floating die pressing system and Ejection Position Constant(E.P.C)principle where the level of ejection of the part from the press is always the same regardless of the part height.
·Use of the die control system for positive die movement and the secure flat-face die stopper design ensuring accurate control of part dimensions,uniform density balance and consistant production.
·The upper ram pressing motion is a toggle-link drive system for superior powder compression characterisics.
·The press design and construction is simple and straightforward resulting in reliable operation and reduced mechanical trouble while still maintaining the sophisticated controlled press motions for the production of intricate and complex parts.
·The press drive and main moving structures are located at the base of the press giving the press a low center of gravity and inherently stable operation.
主要技术参数 TECHNICAL PARAMETER
技术参数:
参数 型号 |
DPA250A |
DPA450A |
最大压制力Max pressing capacity (KN) |
250 |
450 |
最大脱模力Max ejection capacity (KN) |
200 |
300 |
最大装料高度Max depth of filling (mm) |
100 |
170 |
凹模最大止挡力Die stopper capacity (KN) |
125 |
225 |
凹模止挡调节量Die stopper adjustment (mm) |
65 |
120 |
凹模控制力Die control capacity (KN) |
25 |
50 |
凹模控制调节量Die control adjustment (mm) |
100 |
140 |
上冲行程Upper ram stroke (mm) |
150 |
190 |
上冲调节量Upper ram adjustment (mm) |
65 |
85 |
上冲预加载行程Upper ram hold-down stroke (mm) |
65 |
75 |
上冲预加载力Upper ram hold-down capacity (KN) |
1.3 |
1.5 |
每分钟压制次数 s.p.m |
6~25 |
5~20 |
主电机功率 Main motor power kW |
5.5 |
11 |
欠料、过料(固定)Less or over filling (fixed) (mm) |
5 |
成形机净重Press net weight (Kg) |
3600 |
5600 |